GR9277 #71



Alternate Solutions 
Herminso 20090922 19:12:05  For , all of the systems are in the lowest energy state (minimum entropy), so the only choice is (B).   ramparts 20090815 20:35:32  All the solutions are so complicated! :( Here's a way for us stat mech idiots using boundary conditions:
For (or epsilon=0), this should go to . That leaves B and E. (and technically A but that's clearly wrong :) ).
Now E_2 > E_1 so the answer has to be less than for positive epsilon. That leaves B.   moonrazor 20060327 13:37:23  (GR927771) Alternate Solution with less assumptions:
Using P(E) = (1/Z)exp[E/kT] we have
P(E_1) = exp[E_1/kT] / (exp[E_1/kT] + exp[E_2/kT])
= 1 / (1 + exp[(E_1E_2)/kT])
= 1 / (1 + exp[\epsilon /kT])
LaTeX
\begin{eqnarray*}
P(E_{1}) &=& \frac{e^{E_{1}/kT}}{e^{E_{1}/kT} + e^{E_{2}/kT}}\\
&=& \frac{1}{1 + e^{(E_{2}E_{1})/kT}}\\
&=& \frac{1}{1 + e^{\epsilon/kT}}
\end{eqnarray*}
radicaltyro 20061031 14:05:37 
Hi moonrazor. Wrap your latex in single dollar signs.

 

Comments 
ernest21 20190930 04:59:09  Cool! I\'ll surely be coming back for the next posts from you. You\'re an incredibly engaging writer that I can freely recommend this article to my college students. clash royale best decks   ernest21 20190930 04:57:11  Cool! I\'ll surely be coming back for the next posts from you. You\'re an incredibly engaging writer that I can freely recommend this article to my college students. clash royale best decks   ernest21 20190930 04:55:51  Cool! I\'ll surely be coming back for the next posts from you. You\'re an incredibly engaging writer that I can freely recommend this article to my college students. clash royale best decks   juliano lorenso 20141009 17:14:43  This is how I see it ..
1) As T> 0, energy distribution for fermions must reduce to 1/2. So, in our case, it has to be proportional to N0/2.
2) E1 is proportional to +epsilon and E2 is proportional to epsilon
Since we were asked to find the average number of subsystems in the state of energy E1, we can safely eliminate D and E because they have epsilon and we want +epsilon
A is correct if we're talking about classical systems in normal conditions, so we eliminate it
B is incorrect because as T>0, we get N0 and that's nonsense
So the correct answer is (C) .. If we apply T>0 we get N0/2
Voila!!!!   Herminso 20090922 19:12:05  For , all of the systems are in the lowest energy state (minimum entropy), so the only choice is (B).   ramparts 20090815 20:35:32  All the solutions are so complicated! :( Here's a way for us stat mech idiots using boundary conditions:
For (or epsilon=0), this should go to . That leaves B and E. (and technically A but that's clearly wrong :) ).
Now E_2 > E_1 so the answer has to be less than for positive epsilon. That leaves B.
Herminso 20090922 19:08:11 
I think the answer has to be more than for >. Remember that the graph of is below 1 for a positive. Thus <. The answer (B) holds.

shak 20101010 09:25:14 
what about D? it also goes to N/2 when epsilon=0.
why did u ignore it?

asdfuogh 20111005 17:54:19 
You're right, D) also goes to N0/2 when T=>inf. But then, we'd ignore that one when we think about T=>zero because that one blows up, and it shouldn't go bigger than N0.

  engageengage 20090107 20:05:25  I believe what you have down is not the correct fermidirac distribution, which shouldn't have a minus sign in front of the energy in the denominator. The other way to get this answer with few assumptions is just to say the partition function is:
Then, to find the number of subsystems in E1, you have to multiply the probability of being in that state by the number of total particles. From basic boltzmann statistics, you know that:
Multiplying through by the inverse of the boltzman factor that was used, you get:
Multiply by the number of particles and you have answer (B)
antigravity 20101109 08:22:29 
I agree.. We cant assume Fermi Dirac distribution (It can be nything)..
However it has been mentioned tht the system is at high temperature where all the three distributions merge.
So take it as the Boltzmann one..

  Fv4 20081004 09:43:14  as epsilon > , number of subsystems at E1 should approach . Thus, only B) can be the answer.   hassanctech 20070930 22:02:11  Correct me if I'm wrong but if E2E1 = e>0 then lets look at the limit as e > infinity. This means that E2 is of infinite energy and you would expect all the sybsystems to be in the E1 state. Choice B is the only one for which e> infinity reduces to N0.
Blue Quark 20071031 19:22:45 
Am I missing something?
As T approaches infinity all the particles should be in the highest energy state, E2.
For (b), as T approaches infinity the average number of particles in the lower energy state, E1, is equal to No. So as the temperature increases more particles are dropping to lower energy states?

Jeremy 20071101 16:58:13 
Blue Quark,
Check your math on the limit. The high temperature limit is in fact . Here's a qualitative idea of why it's true. At low temperatures, most of the subsystems are in the lowest energy state because there is not enough energy for a transition (taking to represent the amount of energy available to the system). Of course, there may be a few subsystems in excited states, but I'm speaking about the typical case  what the "big picture" looks like. Well, as increases, the available energy increases, and more and more subsystems will be in their excited states. For , the limitation imposed by energy is completely removed, so that it is equally likely to be in any of its available states. This is why we expect to find half of the subsystems in the lower state and half in the higher state. Also note that this macrostate maximizes entropy, whereas putting all subsystems in one state (for example the one with higher energy) will minimize entropy. And one last thing, this understanding allows you to answer #73 (from this test) immediately  no equations needed!

Jeremy 20071113 11:14:08 
I finally found the other problem that my previous post churns out an instant answer for! It's GR8677 #67. So you can see everything one page, here's what it says:
__________
67. A large isolated system of weakly interacting particles is in thermal equilibrium. Each particle has only 3 possible nondegenerate states of energies , , and . When the system is at an absolute temperature , where is Boltzmann's constant, the average energy of each particle is
(A)
(B)
(C)
(D)
(E)
__________
Using the reasoning in my previous post, we know that the 3 states are equally occupied, so the average energy for any individual particle is just the average energy of the possible states: .
Here " target="_blank">http://grephysics.net/ans/8677/67">Here is a link to the page discussing that problem, where others have already mentioned this shortcut.

Jeremy 20071113 11:23:27 
Why can I never get the link to work the first time? I must not be doing it right... but it works the second time. Anyone care to share a linking syntax that works?
Link

jmason86 20090902 19:19:10 
(D) would also satisfy the T> inifnity then ave > . I guess you just have to remember that there is always that minus sign in the exponential when talking about the partition fct or boltzmann distribution.

  Richard 20070913 23:48:09  I too wanted to say that the posted solution is rather poor. This is a Boltzman stat. problem: The probability for a state is the Boltzman factor for that state divided by the Partition Function. What's with the, "let's assume that ?"
evanb 20080625 12:56:18 
It turns out that it doesn't matter what is equal to... it adds a factor of to the numerator and to all the factors in the denominator. Better off setting it to zero, in my opinion, but in terms of the physics it doesn't make one lick of difference: it's like setting your h in mgh potential energy to 0 on the ground.
See radicaltyro's comment on moonrazor's solution for evidence.

  georgi 20070826 22:07:45  the posted solution is actually just purely incorrect. a fermi dirac distribution assumes that the occupancy of a particular quantum state is either 0 or 1 in accordance with the pauliexclusion principle. instead we are actually interested in a maxwell boltzmann distribution in which the particles (in our case subsystems) are distinguishable and any number can occupy either energy state. then we apply the partition function as posted by radicaltyro to obtain our solution.
FortranMan 20081002 15:33:49 
So because a system only has two states doesn't alone mean that it's FermiDirac?

shak 20101010 09:41:21 
right!!

  moonrazor 20060327 13:37:23  (GR927771) Alternate Solution with less assumptions:
Using P(E) = (1/Z)exp[E/kT] we have
P(E_1) = exp[E_1/kT] / (exp[E_1/kT] + exp[E_2/kT])
= 1 / (1 + exp[(E_1E_2)/kT])
= 1 / (1 + exp[\epsilon /kT])
LaTeX
\begin{eqnarray*}
P(E_{1}) &=& \frac{e^{E_{1}/kT}}{e^{E_{1}/kT} + e^{E_{2}/kT}}\\
&=& \frac{1}{1 + e^{(E_{2}E_{1})/kT}}\\
&=& \frac{1}{1 + e^{\epsilon/kT}}
\end{eqnarray*}
radicaltyro 20061031 14:05:37 
Hi moonrazor. Wrap your latex in single dollar signs.

chemicalsoul 20091104 20:58:32 
This should be the standard solution Hon'ble Yosun.

 




The Sidebar Chatbox...
Scroll to see it, or resize your browser to ignore it... 

