GREPhysics.NET
GR | # Login | Register
   
  GR0177 #60
Problem
GREPhysics.NET Official Solution    Alternate Solutions
This problem is still being typed.
Electromagnetism}Flux

Electric flux is given by \oint \vec{E} \cdot d\vec{A}. The electric field from the infinite conducting plane is \sigma/\epsilon_0. The field points directly perpendicular to the plane of the conductor, and thus the normal area it fluxes-through in the Gaussian surface is just \pi (R^2-x^2). (This geometry is obvious if one draws a right-triangle with the bottom leg of length x, the hypotenuse of length R, and the side-leg bordering the conductor.)

Plug everything into the flux equation to get choice (D).

See below for user comments and alternate solutions! See below for user comments and alternate solutions!
Alternate Solutions
ATL
2008-11-07 13:32:36
Gauss's law states that \Phi_E = \int \vec{E} \cdot d\vec{a} = \frac{Q_{enc}}{\epsilon_0}.

The flux should be zero when x=R, which eliminates choices A and B.

The flux should be a maximum when x=0, which eliminates choice C.

When x=0 the enclosed charge is \sigma \pi R^2, therefore the correct answer is D.
Alternate Solution - Unverified
Comments
curious_onlooker
2017-10-25 19:29:58
I\\\\\\\'m late to the party, but I think one way to distinguish between C and D is that the answer should be the same for + and - x. C does not have this property, so choose D. NEC
Baharmajorana
2014-09-19 12:41:36
The circle's radius is \sqrt{R^2 - x^2} then it's cross section is \pi (R^2 - x^2 )NEC
FatheadVT
2010-11-11 16:36:07
Why is the answer not (E)? \Phi = Q_{in}/\epsilon_{0}. If it's a surface charge, then there will be charges on both surfaces, so Q_{in} = 2\sigma A. That gives you (E)NEC
jmracek
2009-03-13 15:00:08
The flux of electric field through the Gaussian surface will equal the sum of the charge inside divided by the permittivity. In this case, we have sheet charge of density \sigma. To find the charge inside the sphere, you find the area of the circle formed by the intersection of the plane with the Gaussian surface then multiply by the charge density:

Q_{enc} = \pi (R^2-x^2) \sigma

So that:

\Phi = \frac{Q_{enc}}{\epsilon} = \frac{\pi (R^2-x^2) \sigma}{\epsilon}
Yurlungur
2012-04-01 20:45:27
This is the best answer, and I think it's what ETS was looking for.
NEC
ATL
2008-11-07 13:32:36
Gauss's law states that \Phi_E = \int \vec{E} \cdot d\vec{a} = \frac{Q_{enc}}{\epsilon_0}.

The flux should be zero when x=R, which eliminates choices A and B.

The flux should be a maximum when x=0, which eliminates choice C.

When x=0 the enclosed charge is \sigma \pi R^2, therefore the correct answer is D.
Crand0r
2010-11-10 19:47:37
The expression in answer C, \frac{\pi\left(R-x\right)^{2}\sigma}{\epsilon_0}, is also a maximum at x = 0.

To eliminate C, you could consider that the first derivative of \Phi should be 0 when x is 0. At that point, I think just doing the problem in a straight-forward manner is faster if you remember how.
calvin_physics
2014-04-03 19:28:29
Choice C gives you maximum flux as well at x = 0.

I eliminated everything else except C and D, and I didn't know which to choose from.
Alternate Solution - Unverified
duckduck_85
2008-11-04 22:25:28
I agree with vbphysics. I think the solution should be changed to show that the E field of an infinite plane is in fact \sigma/2\epsilon_0 and that the 2 cancels out of the denominator when one considers both sides of the circle (as one needs to do when calculating the E field of the inf plane).NEC
wangjj0120
2008-10-28 08:03:24
I don't understand, since flux is \int\vec{E}d\vec{a}, here d\vec{a} is in direction of r (r of the sphere), and direction of \vec{E} is perpendicular to the sheet, that means there is always an angle between d\vec{a} an \vec{E}, except at the point that d\vec{a} is perpendicular to the sheet. In this case, how can you just multiply E by \pi (R^2-x^2) ?
Cosmo
2008-11-07 14:21:52
Consider an upside down hemispherical bowl of radius R at the origin with a charged sheet in the x-y plane. What is the flux through the outer surface of the hemisphere (the bowl shaped part as opposed to the flat circle part)? We know \vec{E} is perpendicular to the sheet and that d\vec{a} is in the direction of r. So there will be an angle between \vec{E} and d\vec{a}. But we also know that the flux going through the hemispherical surface of the bowl is equal to the amount of flux that goes into the flat circular part of the hemisphere. This is easier to calculate since d\vec{a} will be anti parallel to \vec{E} . The area is that of a circle of radius R and the angle is always \pi. \cos(pi) = -1 so the flux is just \(-1) \vec{E}\piR^2 where \vec{E} is the magnitude of the electric field above the sheet. This is the flux going into the bowl so the flux coming out is the negative of the answer. So, for this problem it is the same concept except instead of having a hemisphere, the sphere was slice at a different place by the sheet. So it is the same idea except the flat circle part of the gaussian surface where the sheet cuts through does not have a radius of R but \R^2-x^2
Moush
2010-09-18 11:59:51
Excellent description by Cosmo. Definitely clears things up.
Answered Question!
awhitbe2
2006-06-21 16:50:39
I agee with the above comment. However I feel there is clarification needed (I did not feel this was obvious).

The plane intersect the circle at a distance x from the center. The gaussian surface marks a circle around the plane with radius (R^2-x^2)^1/2 by the pyth. theor. For surface density mult. sigma by area to get total charge. So you get the desired

pi*(R^2-x^2)*sigma/epsilon
NEC
alpha
2005-12-31 22:43:56
testing 123 italics
alpha
2005-12-31 22:54:21
testing 123 it
alpha
2005-12-31 22:56:15
testing 123 it again!
alpha
2005-12-31 22:56:32
grrr
alpha
2005-12-31 22:58:13
again!
alpha
2005-12-31 23:20:51
ZOOK
ali
2006-01-02 01:27:21
testing
NEC
vbphysics
2005-12-14 12:18:03
There is a problem here.

1st the plane is never stated as conducting.

2nd you have two surfaces, albeit of equal size that will contribute to the flux.

\vec(E) should equal sigma/(2 * epsilon) by gauss's law. When you plug that field into the integral, and solve for the flux coming through 2 circles of radius \left(R^2 - x^2\right) (one for each side of the sphere) you will get the right answer.

An alternate way to examine this problem is to ignore the \vec(E) all together Gauss's law says that the flux through s simply connected gaussian surface IS the charge inside divided by epsilon. Therefore all you need is to know is Q = sigma * pi *(R^2-x^2). So flux = sigma * pi* (R^2-x^2)/epsilon.

Sorry about the sloppy LaTeX, I'm still learning.
Blake7
2007-09-21 19:55:53
All ETS is looking for here is a circle with surface charge on it enclosed in a spherical "gaussian" (Gauss's law) surface.

The size of the circle gives one the amount of enclosed charge. The trig gives you the size of the circle. No muss no fuss; not any more complicated than that.
Common Pitfalls

Post A Comment!
You are replying to:
I agee with the above comment. However I feel there is clarification needed (I did not feel this was obvious).
The plane intersect the circle at a distance x from the center. The gaussian surface marks a circle around the plane with radius (R^2-x^2)^1/2 by the pyth. theor. For surface density mult. sigma by area to get total charge. So you get the desired
pi*(R^2-x^2)*sigma/epsilon

Username:
Password:
Click here to register.
This comment is best classified as a: (mouseover)
 
Mouseover the respective type above for an explanation of each type.

Bare Basic LaTeX Rosetta Stone

LaTeX syntax supported through dollar sign wrappers $, ex., $\alpha^2_0$ produces .
type this... to get...
$\int_0^\infty$
$\partial$
$\Rightarrow$
$\ddot{x},\dot{x}$
$\sqrt{z}$
$\langle my \rangle$
$\left( abacadabra \right)_{me}$
$\vec{E}$
$\frac{a}{b}$
 
The Sidebar Chatbox...
Scroll to see it, or resize your browser to ignore it...