GR9677 #58


Problem


This problem is still being typed. 
Optics}Lensmaker Equations
Although this problem mentions lasers, no knowledge of quantum mechanics or even lasers is required. Instead, the problem can be solved as a simple geometric optics problem using the lensmaker's equation, , relating the distances of the object, image, and the focus.
Since there are two convex lenses, one can treat the setup as a telescope. The lens closest to the laser is the objective (with focus ) and the one closest to the biggerradius wellcollimated beam is the eyepiece .
The laserlight comes in from , and thus one has , i.e., the image forms at the focal point.
Using the telescope equation, one has , since one wants a final magnification of 10 (to wit: input beam is 1mm, output beam is 10mm). This narrows down the choices to just (D) and (E).
Since the distance between lenses for a telescope (with incoming light coming from infinity) is given by , which relates the distance of the image from the first lens to the distance of the object from the second lens, one arrives at choice (E). (Correction due to user tachyon.)


Alternate Solutions 
There are no Alternate Solutions for this problem. Be the first to post one! 

Comments 
Rift 20110322 20:10:40  this is a beam expander. the objective and eyepiece lenses' placements are reversed. rnrnhttp://www.edmundoptics.com/technicalsupport/lasers/beamexpanders/?&viewall
Setareh 20111007 09:57:05 
Yeah, as you said, the placements of objective lens and ocular or eyepiece lens in beam expander are opposite of their placement in telescopes. In telescopes the first lens is objective, while in beam expanders the second one is objective. Thankss!

  hanin 20090929 21:26:48  I solved this problem by considering it's like using a telescope reversely:
The beam was enlarged from d=1mm to d=10mm, this means 10x "magnification".
therefore we find the second lens ("objective") has f=15cm. The two lenses should be positioned so that both foci located at the same position, hence the distance = 1.5+15 = 16.5cm
apr2010 20100406 14:36:58 
very nice

  anmuhich 20090401 14:27:47  Envision the light cone converging at the focal point of the first lens, then crossing through the focal point and expanding again. For one focal point the diameter of the cone of light will zero, then for one more it will be back to its original diameter. For each successive focal length the light cone will increase in diameter by 1mm. So you need 10 focal lengths passed the first focal point to reach a 10mm diameter. This already gives you the right answer. To collimate the light again you need just put the right focal length lense at the diameter of the light you want.   BeloitPropagandist 20081107 19:31:59  There is another way. For a compound lens system where d is the seperation between lenses. In the case of a collimated beam, S is infinite so the right side goes to zero. Some algebra later and we find that for two thin lenses, if then the beam will always collimate. Some basic geometry and we find that the magnification
From the first part, the answer is either (c) or (e). For a 10X magnification, the second lens must be 10 times the known lens. Therefore, (E)!   Richard 20071008 18:06:12  Why not just use a little geometry?
You know that the beam from the laser is well collimated, i.e., it emerges parallel. This means it will converge to the focal length of the first lens: .
Now if we want to turn this diverging beam again into a collimated beam with width mm, we need another lens with a focal length equal to the distance from the point at which the beam first converged. This configuration creates two similar triangles:
And the distance of the second lens from the first is simply
Choice (E) is the answer.
jesford 20080411 13:30:30 
This is a really nice answer that requires no knowledge of telescopes or lasers!

gravity 20101104 13:06:20 
We did this kind of stuff all the time in our Lasers lab.
You can set the problem up super easy by noting that the triangles on each side of the focal point are similar (since they are both a distance of their respective f away, in order to give a parallel beam).
Or in other words, .5 (half of 1) is to 1.5 as 5 (half of 10) is to 15.
No need to muck about with remembering a bunch of relations  just draw it out and this problem only takes 15 seconds.

neo55378008 20120424 19:26:06 
Excellent solution!
Instead of doing 15+1.5 though, I would just remember the fact that an object placed at the focal point will always converge at infinity, so that rules out D.

  vroomfondel 20061128 00:58:43  the answer is here:
http://www.physics.smu.edu/~scalise/emmanual/lens/telescope.gif />
the eyepiece is defined opposite to what yosun has  semantics error, that\'s all.   yosun 20051109 14:34:47  tachyon: I've defined the eyepiece as the one closest to the magnified beam, so I believe my formula for M is correct.. However, , as you said. I've fixed this in the solutions. Thanks for the correction.
yubs 20061101 00:13:16 
I agree with Tachyon, something is not right here...
If you are saying (as given in the question), and we want then how can possibly equal 15cm. You're dividing 1.5cm by 10! It has to get smaller!
Like Tachyon said, intuitively we know that if M = 10, the numerator has to be bigger than the denominator.

  tachyon 20051109 10:38:25  The way you defined your lenses, the magnification should be M=Fe/Fo. You know the Fe>Fo to allow distance for the laser to get larger. Also, the distance between the two lenses has to be di1+do2=Fe+Fo=16.5. The correct answer is E.   tachyon 20051109 10:30:01   




The Sidebar Chatbox...
Scroll to see it, or resize your browser to ignore it... 

