GREPhysics.NET
GR | # Login | Register
   
  GR8677 #74
Problem
GREPhysics.NET Official Solution    Alternate Solutions
Verbatim question for GR8677 #74
Optics}Polarizers

One might remember the result from optics that the maximum fraction incident between three polarizers with the first and third orthogonal to each other is 1/8. Or, if not, one can derive it rather quickly:

Suppose the incident intensity of the light (before going through any polarizers) is I.

Light going through the first polarizer has the intensity I_1=I/2.

Light going through the second polarizer has the intensity I_2=I_1 \cos^2 \phi =I/2 \cos^2 \phi. (\phi is the angle between the polarizer and the light.)

Light going through the third polarizer has the intensity I_3=I_2 \cos^2 \theta = I/2 \cos^2 \phi \cos^2 \theta. (\theta is the angle between the polarizer and the light.)

In order for the intensity I_3 to be max, one can take the derivative with respect to either \theta or \phi. Knowing a priori that the first and third polarizers are orthogonal (at 90 degree angles) to each other, one can rewrite either \phi or \theta in terms of the other. So, \phi = \pi/2 - \theta , and thus,


The the derivative to find the maximum, \frac{d I_3}{d \theta}=I/2\cos(2\theta)=0. One finds that 2\theta = \pi/2 \Rightarrow \theta = \pi/4. This implies that Plug in \theta to get I_3=1/8.



See below for user comments and alternate solutions! See below for user comments and alternate solutions!
Alternate Solutions
casseverhart13
2019-09-10 06:12:15
I enjoyed to find this problem. I like your point of view about this. kitchen remodeling RaleighAlternate Solution - Unverified
Comments
casseverhart13
2019-09-10 06:12:15
I enjoyed to find this problem. I like your point of view about this. kitchen remodeling RaleighAlternate Solution - Unverified
whereami
2018-04-09 02:12:01
what does it mean by \"continuously rotated through 180\" ?NEC
Wattson
2015-10-14 09:27:42
If you forget the equation for intensity transmitted through a polarizer, Sakurai\'s quantum book (chapter one) gives a useful analogy with the Stern-Gerlach experiment, for those who happened to use it.\r\n\r\nJust remember that in sequential S-G setups exactly half of the particles will pass through the first \"filter\" and half of the resulting \"polarized\" beam will pass through each subsequent filter oriented at 45 degrees.\r\n\r\nOf course, knowing that the filters in this problem are also oriented at 45 degrees comes from the symmetry argument evanb gave.NEC
neon37
2010-11-03 12:47:58
Well, it does help to have know about the configuration of polarizers from before. Once you know that when you insert the third one the transmitted is not zero, then you can eliminate A. Then unpolarized light through a polarizer give half intensity. When you pass through the more, the intensity is max only if the polarizers are aligned according to the first. But, it was originally oriented so that no light passes through. This should get rid of C, D and E so remainder is B.NEC
thebigshow500
2008-10-13 23:51:00
There is no need of the trigonometric identity when doing real GRE on this question.

"The polarizers are oriented so that no light emerges through the 2nd polarizer..." - this tells you that the first two polarizers form an 90^o angle.

When the 3rd one is inserted between the first two, it is free to rotate through 180^o. The maxium fraction of power, 1/8, occurs only when the light is transmitted at 45^o relative to the 1st and 2nd polarizers.

I_3=\frac{I_o}{2}cos^2(\theta_1)cos^2(\theta_2)=\frac{I_o}{2}cos^2(45)cos^2(45)=\frac{I_o}{8}.

The rest of the angle combinations (e.g. \theta_1=30^o, \theta_2=60^o relative to 1st and 2nd polarizers) will give you an even lower power.

Sometimes, reading questions carefully is a key for a better GRE score!
NEC
evanb
2008-06-20 15:54:02
Symmetry dictates that either the min or the max. electric field will be transmitted at 45 degrees. Then, go from there.
wittensdog
2009-10-07 17:14:33
When I first started studying physics, I didn't understand why everyone made such a big deal out of symmetry. Now, having studied physics for long enough, I appreciate all of the amazing things it can do.

Assuming that there is some angle which corresponds to maximum light transmission (which we know there must be since from experience with rotating a third polarizer in between two crossed ones we know there are times when there is no light transmission and times when there is some), then considering the symmetry of this setup, it couldn't possibly be anything other than straight down the middle. There would be no reason for it to be on either side of the line that splits the difference between the original two polarizing axes. Then you can go ahead and apply the formulas for light going through a polarizer with some angle (making sure you notice that the original light in UNpolarized!).
NEC
blah22
2008-04-05 22:33:12
It is easy to reach the answer via process of elimination here:

After going through the first polarizer, intensity is already cut down to 1/2, this eliminates D and E.

It still has to go through 2 more polarizers which are not parallel to the first, so this eliminates C.

A might be tempting but even general knowledge of how polarization works tells you that you can get some light through two orthogonal polarizers by placing a third in the middle.

Thus, B is left.
jw111
2008-09-01 01:35:34
This is a brilliant way posted by blah22.rnrnLet me explain it in detail.rnNOTATION : (pP1:field direction parallel to polarizer 1, dP1: perpendicular to polarizer 1)rnrnAfter pass the P1, only half of energy passed.rnThus \frac{1}{2}, and the light are all in pP1 state.rnrnYou think they are all in pP1, but that is not true. Actually, half of them are in pP2 and half of them in dP2(suppose P2 is 45^0 respect to P1, explain letter) when the light comes to the front of P2. rnrnWhen the light passing through P2, the remain field strength is \frac{1}{\sqrt{2}} of before.rnrnP.S.(decomposing vector into 45^0 (pP2)and 45^0(dP2)). rnrnSo the power is half again. And all the light is in pP2 state, after passing through P2.rnrnYou think they are all in pP2, but that is not true. Actually, half of them are in pP3 and half of them in dP3 when the light comes to the front of P3.rnrnWhen the light passing through P3, the remain field strength is \frac{1}{\sqrt{2}} of before. So the power is half again. And all the light is in pP3 state.rnrnSo the final power is \frac{1}{2}*\frac{1}{2}*\frac{1}{2}=\frac{1}{8}rnrnWHY 45^0rnrnIf the angle is smaller (to P1), more light passing through P2 you get, but less light pass through P3.rnIf the angle is larger (to P1), less light passing through P2 you get, although more light passing through P3.rnThus, the maximum must happens between them, the 45^0.rn
NEC
nitin
2006-11-16 13:04:56
Corrections:

1)I_3=\frac{I}{2}sin^2(\theta)cos^2(\theta)=\frac{I}{8}sin^2(2\theta).

2)\frac{dI_3}{d\theta}=\frac{I}{2}sin(2\theta)cos(2\theta)=\frac{I}{4}sin(4\theta)=0, and \theta=\frac{\pi}{4} is the value of the angle giving the maximum transmitted power fraction (no need to check for maximality, since \theta=0 is the only other possible value, but this gives zero transmission, which makes sense since this means polarisers 2 & 3 have the same polarisation directions).
spacemanERAU
2009-10-18 19:58:13
thank you nitin...i was sitting here wondering how he got sin(Pi/2)=2
so i was gonna rework the problem to see where the mistake was...but then i saw your post...good job
ali8
2011-06-29 13:07:22
That's excellent, thank :)
withshirt
2013-11-11 06:14:07
I agree with you. ყოჩაღ!
NEC
Andresito
2006-03-19 10:02:37
Yosun, when you use the trigonometric identity, Sin(2*theta) you need to square it and multiply by Intensity/2. The correct expression must then be

Intensity3 = (Intensity/8) * Sine(2*theta).

No need to take a derivative to find the maximum here since Intensity3 has a maximum when the Sine function has a maximum (the argument is pi/2).

That is how you obtain the Intensity/8 result.

Thanks Yosun.
Typo Alert!
agge
2006-03-10 13:52:43
1) the angle phi refers to the 2nd polarizer not the 1st

2) plugging in theta=pi/4 to sin(2*theta) gives 1, hence the result would be I/4....

so your reasoning confuses me..
NEC

Post A Comment!
You are replying to:
1) the angle phi refers to the 2nd polarizer not the 1st
2) plugging in theta=pi/4 to sin(2*theta) gives 1, hence the result would be I/4....
so your reasoning confuses me..

Username:
Password:
Click here to register.
This comment is best classified as a: (mouseover)
 
Mouseover the respective type above for an explanation of each type.

Bare Basic LaTeX Rosetta Stone

LaTeX syntax supported through dollar sign wrappers $, ex., $\alpha^2_0$ produces .
type this... to get...
$\int_0^\infty$
$\partial$
$\Rightarrow$
$\ddot{x},\dot{x}$
$\sqrt{z}$
$\langle my \rangle$
$\left( abacadabra \right)_{me}$
$\vec{E}$
$\frac{a}{b}$
 
The Sidebar Chatbox...
Scroll to see it, or resize your browser to ignore it...