GREPhysics.NET
GR | # Login | Register
   
  GR0177 #99
Problem
GREPhysics.NET Official Solution    Alternate Solutions
This problem is still being typed.
Special Relativity}Conservation of Energy

The tricky part of this problem is to note that the momentum of the photon is shared equally between all three final particles. (This insight was supplied by Felipe Birk). Thus, p_e = p/3, where p is the momentum of the photon and p_e is the momentum of the final electron or photon.

The initial energy before the photon strikes the electron is E_0=pc+m_e c^2, which is just the energy of the photon plus the rest energy of the electron.

The final energy after the collision is E_f = 3 \sqrt{(pc/3)^2+(m_e c^2)}, which is the sum total energy of all three final particles, i.e., the positron and two electrons. (A positron is the electron's antiparticle, and thus they have the same mass.) Note that the momentum split relation mentioned above is used to equate the final particle momentum with the initial photon momentum.

Conjure up the good conservation of energy idea. Equating E_0=E_f, one gets (pc)^2+(m_ec^2)^2 + 2pcm_ec^2 = 9((pc/3)^2+(m_ec^2)^2). Canceling the (pc)^2 terms on both side, then solving, one arrives at pc=4m_ec^2, which is choice (D).

See below for user comments and alternate solutions! See below for user comments and alternate solutions!
Alternate Solutions
opalqnka
2014-10-15 01:29:53
You all post nasty solutions.
Here is an easy one:

The 4-momentum of the photon in the lab frame and the 4-momentum of the stationary electron are:

P_{1} =\left( E/c, E/c, 0, 0 \right) and P_{2}=\left( mc, 0, 0, 0 \right)

After the interaction 3 particles of equal masses and equal energies and momenta are created with the same 4-momentum vector of P_{3}. We do not care about the form of the P_{3} momentum, you will see why below:

Use conservation of 4-momenta:

P_{1} + P_{2} = 3P_{3}

Now square (using the dot product with [-, +, +, +] metric) and use the fact that for a photon P.P = 0 and in the rest frame of the electrons/protons P_{2}.P_{2} = P_{3}.P_{3} = - m^2c^2, ie we exploit the fact that P.P is invariant!

=>

P_{1}.P_{1} + 2P_{1}.P_{2} + P_{2}.P_{2} = 9P_{3}.P_{3}

or

0 - 2Em - m^2c^2 = -9m^2c^2

or E = 4mc^2 as in answer (D).

I hope you will find this approach useful. Thank you for hosting the site!
Alternate Solution - Unverified
ArslanUyghur
2014-09-25 03:50:08
No four vectors and any frames, you can use just Energy–momentum relation and Energy and momentum conservation law:

E^2=p^2+m^2 (basic equation)

for the photon we have:

E=p (remember its mass is zero)

for the electron before collision

E = m (here p=0)

so the total energy of the system before collision is:

E = p +m
or
E^2=p^2+2pm+m^2

Now let's see what is the energy of the system after collision, using Energy–momentum relation we get:

E^2=p^2+9m^2

where p is the same momentum of the photon or total linear momentum of three particles(since momentum is conserved).
Equating the two expressions for square of energy, we obtain the following:

p^2+2pm+m^2=p^2+9m^2$

The solution is:

p=4m

or in SI units:

p=4mc

and energy of the photon is 4mc^2.

The answer is D.
Alternate Solution - Unverified
vadim
2012-11-08 12:52:15
Shorter solution using relativistic invariant:

E^2-p^2=inv

Comparing this value in initial laboratory frame and in final frame of particles one can obtain:

(E+m)^2-p^2=(3m)^2

As far as photon is concerned, E=p, which brings us to E=4m, or in SI E=4mc^2
Alternate Solution - Unverified
insertphyspun
2011-06-26 12:13:41
I have not yet seen the simplest solution, although dryu and matonski came close. Yes, you should use four vectors, but recall that the square of the momentum four vector is invariant! So, jump into the CM reference frame when determining the momentum four vector after the collision to make life simpler! To be more explicit, here it goes:

The momentum four vector before the collision, where E_{\nu} is the energy of the incoming photon and mc^{2} is the rest energy of the electron, is

p_{\mu,i}=\left ( \frac{E_{\nu}+mc^{2}}{c},p_{\nu},0,0 \right )

p_{\mu,i}p^{\mu,i}=\frac{E_{\nu}^{2}+2E_{\nu}mc^{2}+m^{2}c^{4}}{c^{2}}-p_{\nu}^{2}=\frac{2E_{\nu}mc^{2}+m^{2}c^{4}}{c^{2}}

(Using p_{\nu}^{2}=E_{\nu}^{2}/c^{2} should be second nature by now!)

The momentum four vector after the collision, taken in the CM frame of the three particles, is awesomely simple,

p_{\mu,f}=\left ( \frac{3mc^{2}}{c},0,0,0 \right )

p_{\mu,f}p^{\mu,f}=\frac{9m^{2}c^{4}}{c^{2}}

The squared four vectors are equal, so put them together and solve for E_{\nu}!

2E_{\nu}mc^{2}+m^{2}c^{4}=9m^{2}c^{4}

E_{\nu}=4mc^{2}
Alternate Solution - Unverified
dryu
2008-10-17 22:32:47
It's simplest to use four vectors. In natural units:
The initial four-momentum is (E+m,E,0,0) and the final four-momentum is 3*(\gamma m, \gamma m v). The invariant mass, e.g. these four vectors squared, is conserved:
(E+m)^2-E^2=9(\gamma^2m^2-\gamma^2m^2v^2)
2mE+m^2=9 m^2
E=4m
To convert this into SI units, just let m\rightarrow mc^2.
Alternate Solution - Unverified
Comments
opalqnka
2014-10-15 01:29:53
You all post nasty solutions.
Here is an easy one:

The 4-momentum of the photon in the lab frame and the 4-momentum of the stationary electron are:

P_{1} =\left( E/c, E/c, 0, 0 \right) and P_{2}=\left( mc, 0, 0, 0 \right)

After the interaction 3 particles of equal masses and equal energies and momenta are created with the same 4-momentum vector of P_{3}. We do not care about the form of the P_{3} momentum, you will see why below:

Use conservation of 4-momenta:

P_{1} + P_{2} = 3P_{3}

Now square (using the dot product with [-, +, +, +] metric) and use the fact that for a photon P.P = 0 and in the rest frame of the electrons/protons P_{2}.P_{2} = P_{3}.P_{3} = - m^2c^2, ie we exploit the fact that P.P is invariant!

=>

P_{1}.P_{1} + 2P_{1}.P_{2} + P_{2}.P_{2} = 9P_{3}.P_{3}

or

0 - 2Em - m^2c^2 = -9m^2c^2

or E = 4mc^2 as in answer (D).

I hope you will find this approach useful. Thank you for hosting the site!
shka
2018-07-09 17:59:48
*reads Yohni Kahn once* *becomes Einstein*
shka
2018-07-09 18:02:05
nice typo btw
Alternate Solution - Unverified
opalqnka
2014-10-15 01:24:54
You all post nasty solutions.
Here is an easy one:

The 4-momentum of the photon in the lab frabe and the 4-momentum of the stationary electron are:

P_{1} =\left( E/c, E/c, 0, 0 \right) and P_{2}=\left( mc, 0, 0, 0 \right)

After the interaction 3 particles of equal masses and equal energies and momenta are created with the same 4-momentum vector of P_{3}. We do not care about the form of the P_{3} momentum, you will see why below:

Use conservation of 4-momenta:

P_{1} + P_{2} = 3P_{3}

Now square (using the dot product with [-, +, +, +] metric) and use the fact that for a photon P.P = 0 and in the rest frame of the electrons/protons P_{2}.P_{2} = P_{3}.P_{3} = - m^2c^2, ie we exploit the fact that P.P is invariant!

=>

P_{1}.P_{1} + 2P_{1}.P_{2} + P_{2}.P_{2} = 9P_{3}.P_{3}

or

0 - 2Em - m^2c^2 = -9m^2c^2

or E = 4mc^2 as in answer (D).

I hope you will find this approach useful. Thank you for hosting the site!
NEC
ArslanUyghur
2014-09-25 03:50:08
No four vectors and any frames, you can use just Energy–momentum relation and Energy and momentum conservation law:

E^2=p^2+m^2 (basic equation)

for the photon we have:

E=p (remember its mass is zero)

for the electron before collision

E = m (here p=0)

so the total energy of the system before collision is:

E = p +m
or
E^2=p^2+2pm+m^2

Now let's see what is the energy of the system after collision, using Energy–momentum relation we get:

E^2=p^2+9m^2

where p is the same momentum of the photon or total linear momentum of three particles(since momentum is conserved).
Equating the two expressions for square of energy, we obtain the following:

p^2+2pm+m^2=p^2+9m^2$

The solution is:

p=4m

or in SI units:

p=4mc

and energy of the photon is 4mc^2.

The answer is D.
JM777
2018-08-06 07:07:27
Nice job!
Alternate Solution - Unverified
sayebms
2013-09-01 02:28:08
first of all thank you for such a great website.

in this problem we apply both conservation of momentum and conservation of energy.(since we have two unknowns we must have two equations)

p_e =3 \gamma mv call \gamma mv as P which is the individual momentum for each particle.
then
P=1/3 p_i

now apply conservation of energy as given in the solution above.
NEC
vadim
2012-11-08 12:52:15
Shorter solution using relativistic invariant:

E^2-p^2=inv

Comparing this value in initial laboratory frame and in final frame of particles one can obtain:

(E+m)^2-p^2=(3m)^2

As far as photon is concerned, E=p, which brings us to E=4m, or in SI E=4mc^2
Alternate Solution - Unverified
insertphyspun
2011-06-26 12:13:41
I have not yet seen the simplest solution, although dryu and matonski came close. Yes, you should use four vectors, but recall that the square of the momentum four vector is invariant! So, jump into the CM reference frame when determining the momentum four vector after the collision to make life simpler! To be more explicit, here it goes:

The momentum four vector before the collision, where E_{\nu} is the energy of the incoming photon and mc^{2} is the rest energy of the electron, is

p_{\mu,i}=\left ( \frac{E_{\nu}+mc^{2}}{c},p_{\nu},0,0 \right )

p_{\mu,i}p^{\mu,i}=\frac{E_{\nu}^{2}+2E_{\nu}mc^{2}+m^{2}c^{4}}{c^{2}}-p_{\nu}^{2}=\frac{2E_{\nu}mc^{2}+m^{2}c^{4}}{c^{2}}

(Using p_{\nu}^{2}=E_{\nu}^{2}/c^{2} should be second nature by now!)

The momentum four vector after the collision, taken in the CM frame of the three particles, is awesomely simple,

p_{\mu,f}=\left ( \frac{3mc^{2}}{c},0,0,0 \right )

p_{\mu,f}p^{\mu,f}=\frac{9m^{2}c^{4}}{c^{2}}

The squared four vectors are equal, so put them together and solve for E_{\nu}!

2E_{\nu}mc^{2}+m^{2}c^{4}=9m^{2}c^{4}

E_{\nu}=4mc^{2}
4elesta
2012-04-16 06:11:25
Don't understand why initial energy of photon doesn't change in the rest reference frame?
walczyk
2012-11-05 19:11:32
It does change, it is not lorentz invariant. Doesn't matter, because only lorentz invariant quantities are independent of reference frame, we are not dealing with energy directly here, only where it turns up in the momentum four-vector elements.
Alternate Solution - Unverified
erica1989
2010-11-08 21:13:20
Sorry about the multipost, was having issues with the browser. NEC
astro8
2010-09-14 21:09:46
The only part i am confused on is E_o not being a square root of the squares.

ie. E_o = \sqrt{\left(pc\right)^2 + \left(m_ec^2\right)^2}

Is this form of the total energy only used for multiple kinetic and potential energies being added?
tiptoer
2010-10-26 08:32:07
I have the same question. Why is E_0=p^2c^2+m^2c^4 instead of E_0=\sqrt{p^2c^2+m^2c^4}?
aqme28
2010-11-09 18:52:58
I was confused about this at first too, but I figured it out. Yosun just skipped a few steps algebraically.

E^2_0,photon= (pc)^2 since a photon has no mass
E^2_0,electron=(mc^2)^2 since the electron is initially at rest and therefore momentum is 0.
so E_0=E_0,photon + E_0,electron = pc+mc^2
NEC
zmburell
2009-09-30 13:05:08
The electron is inititially at rest, so in the expression for the initial 4-momentum squared, why isnt (pc)=0,

That is, if the electron is initially at rest then all of its energy is in its rest mass
zmburell
2009-10-03 10:36:56
Nevermind, Im retarded, I figured it out
disregard my last post
NEC
matonski
2009-04-01 00:35:29
In a reference frame moving along with the three particles at the end, the magnitude of the momentum 4 vector is simply 3m. Since this is an invariant, it must also be the magnitude of the 4 vector at the beginning. Letting x be the initial photon energy and setting c = 1, we have E_0^2 = (m+x)^2 and p_0^2 = x^2. Therefore, its magnitude is (3m)^2 = (m+x)^2 - x^2 Solve for x and you are done.NEC
Poop Loops
2008-11-02 14:41:44
I'm confused... if they don't say how fast the 3 particles are moving, how can we deduce the energy of the photon? It was at least 2mc^2 since it created a positron and an electron and then moved them. Okay, that makes sense.

But if the collision sent all 3 going at 0.99c then the photon would have had more energy than if they were all going at say 0.1c afterwards. What gives?
flyboy621
2010-11-16 22:12:32
Conservation of momentum requires the 3 particles to have total momentum equal to the momentum of the photon. We are given that they have equal speeds, so they each have momentum 1/3 that of the photon.
NEC
dryu
2008-10-17 22:32:47
It's simplest to use four vectors. In natural units:
The initial four-momentum is (E+m,E,0,0) and the final four-momentum is 3*(\gamma m, \gamma m v). The invariant mass, e.g. these four vectors squared, is conserved:
(E+m)^2-E^2=9(\gamma^2m^2-\gamma^2m^2v^2)
2mE+m^2=9 m^2
E=4m
To convert this into SI units, just let m\rightarrow mc^2.
cbb6x2
2010-11-04 10:35:19
E0=Ef where E0 is the total energy before and Ef is the total energy after. The total energy is the energy of each particle summed. Find the energy of each particle separately where (E_particle)^2 = (pc)^2+(mc^2)^2.
E0=E_gamma + E_electron=(pc)^2 +mc^2
erica1989
2010-11-08 21:09:34
Can you please explain how you got the expression for the four vectors? Thanks!
erica1989
2010-11-08 21:10:32
Hi
Can you please explain how you got the expression for the four vectors? Thanks!
erica1989
2010-11-08 21:12:07
Hi can you please explain how you got this expression?
neo55378008
2012-03-20 21:10:51
It's a shame most books don't teach four-vectors until GR.
Basically, the first component of four-momentum is the energy (as a particle moves through time it has energy), and the other components are just the x, y, and z components of momentum.
The to four-vectors is the metric. For SR you can use (+---) or (-+++) as long as you're consistent.
dryu has used the (+---) metric, meaning when you take a dot product, the time components keep their sign, and the space components get the opposite sign.
neo55378008
2012-03-20 21:11:43
*they key to the four-vector is the metric
Alternate Solution - Unverified
ssp
2008-10-17 12:35:10
Why does not common sense work?rnrnYou create e^{-}-e^{+} pair, that is an energy of 2mc^2rnYou put energy into the resting e^{-} that gets some energy \gamma mc^2rnThen you need energy to make the e^{-}-e^{+} pair move, so you need \gamma 2mc^2 for the total energy of those particles.rnrnAdding up all energy you need to get something above 3 at least... you are down to 2 answers and 5 seems a bit large for \gamma so you pick 4
physick
2011-09-25 10:16:05
This approach works fine -- as you said, the answer must be over 3 m c^2, which narrows it down to D and E. Then use the fact that there is an upper limit on the amount of energy the photon could have (such that the speed of the particles doesn't exceed c). This means that if E is possible, then D would have to be possible too! Since the reverse is not true, we may eliminate E to select D as the answer.

This method eliminates option E a bit more logically instead of leaving it to the sense that E "seems a bit large."
NEC
Ning Bao
2008-02-01 08:26:25
If we set c and m=1 and let p=a*m=a The math becomes much simpler.NEC
Tommy Koulax
2007-11-01 22:08:02
I don't understand why p is divided by three. If the photon is no longer, then shouldn't the p be divided by 2?
alpha
2008-02-07 11:02:47
i think it is because there are 3 final particles?
Answered Question!
TigerTed8
2007-09-13 18:14:56
Although the overall solution seems okay, I think there is a small typo. E_f = 3 \sqrt{(pc/3)^2+(m_e c^2)^2}. Note the second squared on the second term.
sravani
2008-10-09 19:05:48
TigerTed8 is right. Solution has to be corrected by squaring the second term. Yosun, you got to correct it...
zylstra
2009-04-01 18:35:24
Please excuse my ignorance. How did you get this formula for E_{f}?
NEC
angiep
2005-11-11 22:17:50
im confused, the problem says the photon is destroyed. you say all three share the momtentum, but there are only 2...
angiep
2005-11-11 22:18:29
nevermind. two electrons, duh
NEC
Void
2005-11-09 23:08:19
Hi Yosun. Great site. I have a few solutions to GR9677 that aren't on your PDF yet. Do you take submissions? How should I send them, if so?
yosun
2005-11-09 23:36:54
Hi, please post alternate solutions on the website in the comments section corresponding to the particular problem. (The pdf I posted in the yahoo physicsgre group is incomplete and contains a number of errors that I have corrected here on this site. Of course, users like you might have more elegant solutions than what I have posted---so, feel free to post away. This site aims to be the most convenient one-stop source for all solutions to released ETS GRE Physics exams. You can help by contributing.)
NEC
yosun
2005-11-09 22:08:33
This solution has been corrected. Fixed Typos!

Post A Comment!
You are replying to:
If we set c and m=1 and let p=a*m=a The math becomes much simpler.

Username:
Password:
Click here to register.
This comment is best classified as a: (mouseover)
 
Mouseover the respective type above for an explanation of each type.

Bare Basic LaTeX Rosetta Stone

LaTeX syntax supported through dollar sign wrappers $, ex., $\alpha^2_0$ produces .
type this... to get...
$\int_0^\infty$
$\partial$
$\Rightarrow$
$\ddot{x},\dot{x}$
$\sqrt{z}$
$\langle my \rangle$
$\left( abacadabra \right)_{me}$
$\vec{E}$
$\frac{a}{b}$
 
The Sidebar Chatbox...
Scroll to see it, or resize your browser to ignore it...