GREPhysics.NET
GR | # Login | Register
   
  GR9277 #42
Problem
GREPhysics.NET Official Solution    Alternate Solutions
\prob{42}
A cylinder with moment of inertia $4kgm^2$ about a fixed axis initially rotates at 80 radians per second about this axis. A constant torque is applied to slow it down to 40 radians per second.

If the cylinder takes 10 seconds to reach 40 radians per second, the magnitude of the applied torque is


  1. 80 Nm
  2. 40 Nm
  3. 32 Nm
  4. 16 Nm
  5. 8 Nm

Mechanics}Angular Kinematics

Kinematics with angular quantities is exactly like linear kinematics with

x \rightarrow \theta (length to angle)

a \rightarrow \alpha (linear acceleration to angular acceleration)

v \rightarrow \omega (linear velocity to angular velocity)

m \rightarrow I (mass to moment of inertia)

F \rightarrow \tau (force to torque).

Thus, one transforms v=v_0+at \Rightarrow \omega=\omega_0+\alpha t.

Plugging in the given quantities, one gets \alpha = \frac{\omega-\omega_0}{t}=\frac{40-80}{10}=-4rad/s^2.

The torque is given by \tau = I \alpha = -16Nm, whose magnitude is given by choice (D).

See below for user comments and alternate solutions! See below for user comments and alternate solutions!
Alternate Solutions
There are no Alternate Solutions for this problem. Be the first to post one!
Comments
mvgnzls
2011-09-15 18:23:37
I did this solution: (is it correct)?::

L = IW
T= \dot{L} = I \dot{W} = I dW/dt
dW = 40 rad/s
dt = 10 s
I = 4

then
T = 16

is this correct?
NEC
crossno
2010-11-12 20:12:16
Just like linear impulse which says:
F\Deltat=\DeltaP=m\Deltav
angular impulse says
\tau\Deltat=I\Delta\omega where
I=4
\Delta\omega=40
\Deltat=10
therefor \tau=16Nm

NEC
jmason86
2009-09-03 18:52:53
This is similar to grae313's solution.. but here's what went through my head.

F=ma
T=I\alpha by analogy

I = 4 (given)
the change in (angular) velocity is 80-40=40 rad/sec
Also given that the time it takes to do that change is 10 sec.
By units, \frac{\delta V}{\delta t} will give units of rad/s^2 which is an acceleration.

So T = 4 * 40/10 = 4*4 = 16
NEC
grae313
2007-10-14 14:16:38
Here's an alternate solution:

\ N = \frac{dL}{dt} = \frac{\Delta L}{\Delta t} = \frac{I \Delta w}{\Delta t}

\ N = \frac{4(40-80)}{10} \ = -16

The question asks for the magnitude.

NEC

Post A Comment!
You are replying to:
Here's an alternate solution: \ N = \frac{dL}{dt} = \frac{\Delta L}{\Delta t} = \frac{I \Delta w}{\Delta t} \ N = \frac{4(40-80)}{10} \ = -16 The question asks for the magnitude.

Username:
Password:
Click here to register.
This comment is best classified as a: (mouseover)
 
Mouseover the respective type above for an explanation of each type.

Bare Basic LaTeX Rosetta Stone

LaTeX syntax supported through dollar sign wrappers $, ex., $\alpha^2_0$ produces .
type this... to get...
$\int_0^\infty$
$\partial$
$\Rightarrow$
$\ddot{x},\dot{x}$
$\sqrt{z}$
$\langle my \rangle$
$\left( abacadabra \right)_{me}$
$\vec{E}$
$\frac{a}{b}$
 
The Sidebar Chatbox...
Scroll to see it, or resize your browser to ignore it...